Etching grounds & resists
Etching grounds & resists
from 9,46 € In StockUltraflex engraver liquid ground
In bottles of 75ml, 0,5l & 1l. To be applied like Lamour black satin varnish: on cold plate with a soft brush....
from 9,46 €
from 6,04 € Product available with different optionsLamour black satin hard ground
Bottles of 75ml, 250ml & 1l. It has to be applied the same way as the Ultraflex varnish ground, on cold plate...
from 6,04 €
from 8,75 € In StockLiquid siccative ground
75ml bottle It is a stop out ground that dries very quickly without dissolve ground underneath.To be applied with...
8,75 €
from 14,42 € In StockDuroziez black fluid retouching ground
250ml bottle. To be applied with a brush in thin layers. It is advised for using as a stop out ground for...
14,42 €
from 8,46 € In StockTransparent liquid ground
75ml bottle To be applied on cold plate with soft brush.It dries slowly.Its transparency allows to see the drawing...
8,46 €
from 23,29 € In StockAlcohol varnish
0,5l bottle. It is a plate baking and stop out varnish.Contains 85% alcohol. Dries very quickly.
23,29 €
from 13,17 € In StockLamour black covering varnish
250ml bottle Extremely resistant. Particularly recommended for aquatint techniques.To be applied with a brush to the...
13,17 €
from 11,46 € In StockLamour soft black ground
11,46 €
from 6,58 € In StockKorn lithographic lead
Only a lead, it must be used with a crayon holder. Used in lithography for drawing on stones, alu and zinc plates, or...
from 6,58 €
from 11,83 € In StockKorn lithographic crayons
In box of 12 sticks. Used in lithography for drawing on stones, alu and zinc plates, or on films but also used as a...
from 11,83 €
Nos meilleures ventes
from 0,79 € In StockLinoleum
Grey Lino, 3.2mm thick.With its homogeneous, velvety surface, this product lends itself perfectly to engraving...
from 0,79 €
from 1,71 € In StockJS Opal 250gsm
The JS Opal was developed for intaglio printing. Its fine grain and its sizing (only internal) make it suitable for...
from 1,71 €
from 2,08 € In StockHahnemühle Copperplate 300gsm
A paper with a light grain, ideal for etching: its ability to print even the smallest details is exceptional.
from 2,08 €
from 1,21 € In StockZinc unpolished
The thickness is 0,8mm.Plates are unpolished and protected by a plastic film. Several sizes are available:9x12cm /...
from 1,21 €
